Riddhi Siddhi Metal Impex is one of the leading EN1A Round Bar Manufacturers, Supplier & Stockist in Delhi. The EN1A Round Bar have been designed under national and international industry rules using high-grade raw materials and advanced technology. Our EN1A Round Bar and other products are subjected to various quality checks, and then goes for packaging. We have a ready stock of EN1A Round Bar of different sizes and shapes per the customers’ requirements.
EN1A Round Bar, EN1A Round Bar Supplier, EN1A Round Bar Stockist in Delhi – Riddhi Siddhi Metal Impex
Riddhi Siddhi Metal Impex is mainly concerned with the needs of the industry. To meet the industrial needs and demand, we manufacture and supply D2 Steel Round Bar with additional advantages and functionality. Our EN1A Round Bar is reputed and well known across the globe for its reliability and quality. We treat our clients as partners by providing them with our products and services. We are also known as one of the Largest Suppliers of Gaskets.
EN1A Round Bar Specification, Grades, Size & Materials in Delhi
| Grade | EN1A Round Bar |
|---|---|
| EN1A Square bar size | 4 to 100mm |
| Carbon Steel EN-1A Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| CS EN-1A Hex Bar size | 2-100mm A/F |
| EN1A Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Carbon Steel EN-1A Rectangles Size | 33 x 30mm to 295 x 1066mm |
| CS EN-1A Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| EN1A Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Carbon Steel EN-1A Section | 3.0 to 12.0mm thickness |
| CS EN-1A Round bar size | Diameter: 3-~800mm |
| EN1A Billet Size | 1/2″ to 495mm Diameter |
| Carbon Steel EN-1A Round Bar Standard Dimensions | Diameter / Height:
EN1A Rod and Bar Sizes : 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches. |
| EN1A Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Carbon Steel EN-1A Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| CS EN-1A Technique | EN1A Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| EN1A Condition | Hardened & tempered, annealed |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Form | EN1A Round, Rod, T-Bar, EN1A Channel Bar, Precision Ground Bar, EN1A Flat Bar, EN1A Square Bar, EN1A Blocks, EN1A Round Rod, EN1A Rings, EN1A Hollow, EN1A Triangle, Rectangle, Hex (A/F), EN1A Threaded, Half Round Bar, Profiles, EN1A Billet, EN1A Ingot, I/H Bar, Forging etc. |
| Processing | Bar cutting to 650mm |
| Our EN1A Round bar conforms to NACE MR0175/ISO 15156 | |
