What is a Condensate Pot? Application of Condensate Pot
Condensate pots are primarily used to improve the precision of differential pressure flow measurement in steam (or vapor) applications. They’re used to make sure that steam condensation in the impulse lines doesn’t interfere with the ability to accurately sense differential pressure variations and to reduce gauge line error caused by differences between pairs of impulse lines. Riddhi Siddhi Metal Impex is a leading manufacturer of Condensate pots, Steam Condensate pots, Condensate pot level gauges, and Condensate Seal Pots in a variety of shapes and sizes as per the customers’ requirement.
Condensate Pot Applications, Condensate Pot Uses
The condensate pots often help to trap any foreign content in the pipeline, which helps to protect the sensitive instrumentation components. The condensate is drained from the bottom valve attachment, and the drain port is ideal for use with ball valves.
- Condensate Pot used in Refineries
- Stainless Steel Condensate Pot used in Liquid petroleum gas processing plant
- Condensate Pot used in Power Plant
- SS Condensate Pot used in Sewerage systems, industrial water lines.
- Condensate Seal Pot used in heating, air-conditioning equipment.
- Condensate Pot used in Steel Plants
- Condensate Seal Pot used in Instrumentation systems
- Condensate Pot used in Paper & Pulp Industry
- Steam Condensate Pot used in Food Industry
Condensate Pot Installation, How to Install a Condensate Pot?
Condensate Pot Installation might also be vertical or horizontal lines between the primary (Flow Meter) and secondary (transmitter/gauge) to serve as a barrier to the line fluid and enable direct sensing of flow conditions.
Steps of Condensate Pot Installation
- Evaluate the number of connections required on the condensate pot before ordering (inlets, outlets, fill port, drain port, gas vent port, etc)
- Define condensate pot volume in liters and system pressure and temperature requirements.
- Consider the need to trace heat and insulate all impulse lines.
- Consider the need to add anti-freeze media such a glycol to the water lines.
- Keep vapor impulse lines as short as practicable.
- Ensure both condensate pots are mounted at the same level. The higher connection point should be the reference. Consider both Vertical and horizontal steam pipelines.
- The differential pressure measuring device (DP) should be mounted below both the condensate pots and the steam pipeline.
- It is recommended that both impulse lines from the condensate pot to the DP include the facility for ‘blowdown’. Blowing down these lines periodically ensures that the collection of debris is prevented from impacting the measurement accuracy.
Condensate Pot Specification, Grades, Size
| Size | 2″, 3″, 4″ and larger size upon request |
| Length | 8″, 10″, 12″ and larger length upon request. |
| Working pressure | 6000 Psig (413 Bar) |
| Material of construction | SS 316, SS 304, C.S., ASTM A 106 Gr B |
| Pipe Schedule | 40, 80, 160, XX seamless pipe. |
| NPT | As per ANSI B1.20.1 taper pipe thread 1/2″ furnished. |
| Header Inlet | 1” Female BSP or Npt threaded to ASME B16.1 or Flanged inlet optional |
| Header Outlet/drain | None / or ¼” Male Bsp or Npt threaded to ASME B16.1 or 150# cast fitting |
| Outlet Ports | 1-port or 2-port opposite or on alternate sides, ½” Male Bsp or Npt threaded |
Condensate Pot Specification, Materials
| Material | Shell | Cap | Pipe Schedule | Test Pressure |
| Carbon Steel | A-106 | A-105 | Sch.40 | 80 Kg / Cm2 |
| Sch.80 | 125 Kg / Cm2 | |||
| Sch.160 | 125 Kg / Cm2 | |||
| Stainless Steel | SS304 | SS304 | Sch.40 | 90 Kg / Cm2 |
| Sch.80 | 150 Kg / Cm2 | |||
| Sch.160 | NA | |||
| Stainless Steel | SS316 | SS316 | Sch.40 | 90 Kg / Cm2 |
| Sch.80 | 150 Kg / Cm2 | |||
| Sch.160 | NA | |||
| Alloy Steel | A-335 | A-182 | Sch.40 | NA |
| A-12 | F-12 | Sch.80 | 125 Kg / Cm2 | |
| Sch.160 | 210 Kg / Cm2 | |||
| Alloy Steel | A-335 | A-182 | Sch.40 | NA |
| A-12 | A-12 | Sch.80 | 125 Kg / Cm2 | |
| Sch.160 | 210 Kg / Cm2 | |||
| Special | Specify | Specify | – | – |
| Monel & Hastelloy | – | – | – | – |
Types Of Condensate Pot We Manufacture and Supply
Riddhi Siddhi Metal Impex is most leading Stainless Steel Condensate pot Manufacturers and Suppliers in India
Riddhi Siddhi Metal Impex is India’s most trusted Stainless Steel Condensate Pot Manufacturers & Supplier in India. Our High-quality Condensate Seal pot, sensible customer service, and in-house Condensate Pot 4 Ports Type 3 processing capabilities have made us one of the best emerging and leading suppliers for Condensate Pot 6 Ports in India. Riddhi Siddhi Metal Impex is an ISO 9001:2009 certified company that has been in existence since 2003. Product dependability and performance have created Riddhi Siddhi Metal Impex leading businessperson, manufacturers, and suppliers of Condensate Pot 4 Ports Type 2 in India.
Carbon Steel A105 Condensate Pot, Stainless Steel 316 Condensate Pot, Hydraulic Condensate Pot, Alloy Steel Condensate Pot, Nickel 200 Condensate Pot 6 Ports, Monel 400 Condensate Pot 2 Ports.
Other Related Product We Manufacture and Supply
- Flanges Manufacturers in India
- Forged Fittings Manufacturers in India
- Buttweld Fittings Manufacturers in India
- Gaskets Manufacturers in India
- Filteration & Purification Manufacturers in India
- Reducer Expander Manufacturers in India
- Tube Fittings Manufacturers in India
- Fasteners Manufacturers in India
- Condensate Pot Manufacturers in India